Installation Manual

Dear customer,

You have purchaced a wall mounted massage device. In the package you will get one wooden board, tho wooden sticks with wheels, two wooden sticks wirh wooden balls, set of screws, anchors and metal plates for mounting the board to the wall, one metal rod and if you buy extra, four wooden hangers with screws used for placing the stick tools on the board itself. How to mount a board on the wall: Unpack the board, find the screws with the universal plastic anchors( can be used on brick, concrete, wood, drywall ). Choose the wall you want your board to be fixed on. Please check for any instalation on, in or behind the wall(electric, plumming). Before the drilling adjust the board the way you like it, the hight of the board iz advised to be where the highest hole of the board meets the top position of the neck of the highest person who will be using the massager. When you position the board on the wall, mark the four holes for drilling. Use the 8mm drill to drill the holes in the wall, use the anchors provided in the package and fix them in the wall. After you placed the anchors screw the board to the wall with the screwdriver or a screw gun.

If you purchaced the stick holders you adjust them how ever you like by screwing them on the side of the board also by using a screwdriver or a screw gun. We use the x type screw heads. Maintenance of the device is very important. It is not designed to be used outside, we made it in wood material so we follow the eco normatives. It is not recomended for the wooden sticks to be left inthe board for longer time, wood tends to expand over time and in very humid areas, and you can have problem of taking the sticks out of the board. If the sticks gets too big for the holes you can gently sand them with the sand paper and manually adjust them to fit the holes again.

We hope you will have a lot of help and a good time with our device!

The MILISHA team